Skip to content

Your first race night

This is the whole flow, end to end, for the first race you ever run. It assumes BeamJoy is installed and that you have made yourself the owner. Nothing else — you do not need to build a track, and your players do not need to install anything.

Every activity in BeamJoy follows the same lifecycle. Learn it once here and derbies, hunts and infected rounds will all feel familiar.

Pick a race → Open lobby → Everyone readies up → Countdown → Race → Results
│ │ │
others can join frozen on your slot leaderboard,
from Happening now until it ends personal bests

An event in phases puts a break between each phase and runs the middle part again:

… → Countdown → Phase 1 → Break (results) → Countdown → Phase 2 → … → Event result

BeamJoy draws a rail down the right edge of your screen. Clicking an item on it opens a small side panel; Full opens the whole window instead, and Small goes back to the panel.

Rail item What it opens
Now Happening now — every lobby and game running on the server, with Join and Spectate. A badge counts them.
Play Activities — the lists you start a race, hunt, derby, infected round or bus line from
Crew Your crew: up to 8 players who join your activities automatically
(a number) The player list. The label is the number of players connected.
Vote Start a map vote or a kick vote. Only shown if your group may call one.
Setup Your own settings
Full / Small Switch between the full window and the side panel
Station / Refuel Only when you are low on fuel: sets a waypoint to the nearest station, or calls an emergency refuel once you are empty
Hide Puts BeamJoy away. The F4 menu brings it back.

If you are staff, the rail says so under the logo. With the full window open, clicking a rail item switches to that tab instead of opening a panel.

The full window has tabs across the top, in this order: Home, Activities, Crew, Players, Leaderboards, Settings. Staff also get a Server config button beside them. A server plugin can add up to four items of its own to the rail, and tabs to the window.

If the rail is not there at all, see troubleshooting.

Open Activities and find the Races section. A fresh install already has races on it: BeamJoy bundles 315 races across 14 maps, most of them dressed with props, so there is something to drive on the first night without anyone opening an editor.

If the list is… Then
Full of races Pick one. Search by name, or sort A–Z, newest or oldest.
“No races on this map yet.” Switch to a map that has them, import the map’s own time trials and quick races from the race editor, or build one.

Each row shows its gate count, prop count and author. Selecting one opens the start menu.

Three buttons, and the difference between them is who can get in:

  • Open lobby — listed in Happening now and announced to the server. Anyone can join until it starts. This is the one you want for a race night.
  • Private lobby — invite only, never listed and never announced. If nobody joins it starts as a solo run as soon as you are ready.
  • Start solo — just you, straight away. The usual way to set a personal best.

Your lobby holds exactly as many racers as the race has start positions, and the panel says so: your race lobby, 3 of 12. Open slots are advertised as Anyone can join from Happening now. A race drawn with only one start position cannot be a lobby at all — BeamJoy forces it solo, because there is nowhere to put a second car.

If you are in a crew, opening a lobby pulls in every crewmate who is free. That is the point of a crew — the leader opens something and the group arrives without anyone clicking Join.

The start menu carries the settings for this race. The ones worth a look on your first night:

Setting What it does
Laps How long it is. A point-to-point route runs once.
Vehicle restriction Free (anything), Single Config (everyone is put into the car you are driving right now), Pool (everyone picks from a preset list), or Race-defined (whatever the race itself says).
Multiplayer On: others can join on the grid and the countdown waits for everyone to ready up. Off: it starts the moment you ready up.
Grid placement Join order, Random, or Manual — you place people yourself.
Start sequence Countdown, or Lights: five lights a second apart, held lit for a moment the server picks fresh each time so it cannot be learnt, then out together.
Players can join mid-race A latecomer starts on their own from a free slot after a short countdown. Their time still counts from the race’s start.

Everything else lives behind Advanced settings, grouped as Lobby and vehicles, Rules, The start, Ghosting, Anticheat, Timers and Display. The defaults are a normal race; you do not have to touch any of it. Racing explains the ones you will eventually want.

You can still change settings while the lobby is open — Change settings does it, and saving sets everyone back to not ready so nobody is surprised by a rule that appeared after they readied.

Everyone in the lobby presses I’m ready. The panel shows who has and who has not, and there is a chat command for it too — /race ready.

The race starts when everyone is ready, or when the lobby’s own clock runs out:

  • Grid ready timeout is a floor, not a delay to suffer: the grid stays open at least this long even once everyone is ready, so a latecomer has a chance.
  • Grid timeout is the hard cutoff. When it expires, the racers who are ready start and the ones who are not are dropped.

At the countdown you are moved onto your grid slot and frozen there until it ends, so nobody can roll before the start. With Lights, your car is released as the first light comes on — hold it on the brake, because moving before the lights go out is a JUMP START, and a jump start penalty in seconds is added to your race time.

The race HUD carries your lap, your position, your last and best lap, the gap to the car ahead and behind, and the fastest lap of the race. Gates appear in the world and on the minimap.

A few things that will come up in the first race:

  • Retire gives up your attempt and leaves you spectating the rest without leaving the session. On the HUD it is a hold, not a click, so it cannot happen by accident.
  • DNF timeout marks a racer who has stopped moving as DNF. A warning counts down first.
  • A disconnect is not the end. Come back within the Rejoin time and you carry on from your last checkpoint, in your exact car. The clock keeps running while you are gone.
  • Resets may cost you, depending on the race: time added, the car held where it reset, or refused outright above a speed so a reset cannot be used as an airbrake.

If you are staff, Race control appears during the race: time penalties of 0.5, 5 or 10 seconds that add up and are applied at the finish, disqualifying a racer to the bottom of the results, and — in an event — a red flag that ends the phase, +5 min, +1 lap or +1 run.

When you cross the line your race is over and your classification is fixed. The Results tab of the race panel fills in once everyone has finished or retired, with a lap breakdown per racer.

Times go to the race’s own leaderboard, which survives restarts: the top 100, with your own rank pinned separately if you are outside it, and a popup when you set a personal best or a server record. Leaderboards in the full window collects every board — races, deliveries, derby, drift and drag.

A lap that touched the pit lane counts toward your race time but is not eligible for best lap or the leaderboard, so a drive-through can never become a shortcut.

A race can be an event of up to 20 phases — practice, qualifying, heats, a final — each with its own start, length, ranking and grid. The start menu has ready-made formats:

Format What it runs
Race One race. This is what you just did.
Qualifying + race A qualifying phase ranked on best lap, then a race gridded from it.
Practice, qualifying + race The same with practice in front.
Sprint + feature (reversed grid) A short race, then a longer one with the front of the grid turned around.
Time attack Ranked on each racer’s best lap.
Knockout qualifying + race Only the top n of a phase go through to the next.
Two runs, times added up Both runs summed, rally-style.
Custom Build the phases yourself, and save it as a format of your own.

Between phases there is a break showing that phase’s results, with a tab per phase, and the leader can start the next one early. Phases are the subject of their own section in Racing.